TheToolStore.ca | Samona 50pc Router Bit Set 1/4'' Shank 38026 Only $59.99

Description:

• Everything you need to get started on just about any project!
• 50 most popular Router bit profiles including 22 bearing bits
• Contains all the most commonly used edge forming bits including Cove, Round Over, Chamfer and more.
• All your router bits organized in a protective wood case.
• Made from high quality carbon steel and tipped with tungsten carbide. 
• The carbide is precision ground to give consistent clean cuts while maintaining a sharp edge. 
• Majority of bits are chip-limiting style that offers more safety than regular bits,  and provides a better balance.

Specification:

10 x straight / droite: 1/8", 5/32", 3/16", 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 13/16" (3mm, 4mm, 6mm, 8mm, 10mm, 12mm, 14mm, 16mm)
1 x combination bevel / biseau de combinaison: 1/2” (12.7mm)
1 x mortising / mortaise: 1/2” (12.7mm)
1 x classical / Classique: 1/2” (12.7mm)
1 x keyhole / guichet: 3/8” (9.5mm)
3 x corebox / gorge ronde: R1/8”, R3/16”, R1/4” (R3.2mm, R4.8mm, R6.35mm)
2 x round nose / gorge ronde: R3/16”, R1/4” (R4.3mm, R6.35mm)
2 x 60° V groove / 60° rainure en V: 3/8”, 5/8” (9.5mm, 15mm)
2 x 90° V groove / 90° rainure en V: 3/8”, 1/2” (9.5mm, 12.7mm)
4 x dovetail / Queue-d'Aronde: 3/8”, 1/2”, 9/16”, 5/8” (9.5mm, 12.7mm, 14.3mm, 16mm)
1 x panel pilot / Guide-Panneau: 1/4” (6.35mm)
4 x flush trim / Dressage Ras: 3/8“x1/2”, 3/8”x 1, 1/2”x1/2”, 1/2”x1” (9.5x12.7mm, 9.5x25.4mm, 12.7x12.7mm, 12.7x25.4mm)
2 x cove / gorge: R1/4”, R5/8” (R6.35mm, R9.5mm)
4 x roundover / arrondi: R1/8”, R1/4”, R5/16”, R3/8” (3.2mm, 6.35mm, 9.5mm, 12.7mm)
2 x roman ogee / Doucine Romain: R3/16”, R1/4” (R4mm,, R6.35mm)
1 x 25° chamfer / 25° chanfrein: 5/8” (16mm)
1 x 45° chamfer /  45° chanfrein: 1-1/4” (32mm)
3 x slot cutter / Fresas de ranurar: 1/4”, 3/8” (6.5mm, 9.5mm)
1 x classical cove / gorge Classique: R5/16” (R9.5mm)
4 x beading / baguette: R1/8”, R1/4”, 3/8”(R3.2mm, R6.35, R9.5mm, R12.7mm)