Clear-Cut TS Stock Guides for table saw Jessem 04301
Nothing on the market can provide you with the safety and precision while holding your stock and preventing kickback withour certain limitations. Now there is an option for your table saw with o limitations. Introducing out Clear-Cut TS Sotck Guides. The unique guide rollers on the stock guides aare mounted on a 5 degree angle effectively steering your stock toward the fence. To help prevent kick back, each roller is mounted on a one way needle roller bearing. the roller arm holds your work under spring pressure to ensure your work is held firmly in place. The angle of the arm causes the roller to hold with morr force if the wood tries to move against the direction of feed. Set up is fast and easy. The stock guides can also pivot out of the way and tuck behind the surface of your fence when not in use. With Clear-Cut TS Stock Guides you won't have to struggle to hold wide boards or large panels as you try to feed it through your saw blade. The guides pull your stock securely into position and hold your work tight to the fence. You will acheive safer, smoother and more precise cuts as your work is always held in position. Clear-Cut TS Stock Guides mount to most commercially available table saw fences and with the use of our t-track you have complete adjustability of your stock guides. The guides have 3-1/8 of total vertical travel and can accomodate a maximum stock thickness 13/16" above the mounting surface when mounted with the the t-track. Clear-Cut TS Stock Guides are CNC machined from solid alumnium and anodized for appearance and durability. The roller axles are CNC machined for cold rolled steel and case hardened for durability. The adjustment bar and spring retainer is machined from stainless steel for corrosion resistance. The rollers are CNC machined from wear resistant acetol resin which also has a low coefficient of friction. The traction tires are molded out o urethane for long life and superior grip on your stock. With JessEm" Clear-Cut TS Stock Guides set up is fast and easy. They are locked in their position along the fence with 2 knurled knobs. The height distance to fence setting of each guide is controlled with the tighteninbg of the large up top clamping knob. When not in use they can just pivot out of the way.
Clear-Cut TS™ Stock Guides come with (2) stock guides, (1) 30" t-slot mounting track, (1) drill bit (for drilling pilot holes for mounting) and all necessary mounting hardware. (T-25 Torx screwdriver required for mounting track to your fence)
Stock Guides can be purchased individually. 30" or 12" mounting tracks can also be be purchased individually.