This one simple kit provides everything you need to switch from drilling Pocket-Holes to driving Pocket-Screws, in just seconds
All new 3/8" Hex-Shank Step Drill Bit snaps directly into the Quick Change Chuck – no need for a bit adaptor.Innovative chuck features an industrial design which eliminates slippage & optimizes drilling power.
6" - #2 driver is the most versatile length for Pocket-Screw applications.
Quick Change Chuck
6''#2 Square Driver
3/8" Hex-Shank Pocket-Hole Drill Bit
Allen Wrench and Depth collar
Kreg, Maxi-Loc Pocket Hole Screws
Kreg's most common screw head type is the which is a washer head screw.
The large bearing surface of the washer head is designed to seat securely in the bottom of the pocket, providing a tremendous amount of consistent clamping force on the joint line.
Case Hardened Steel - No Bending and no Breaking
Self-Tapping Tip - No Need to Drill Pilot Holes
Bronze-colored finish and dry-lubricant coating improves driving torque and rust resistance
Kreg Face Clamp (3" Reach)
Helps to ensure a perfectly flush joint every time.
Without clamping, the joint can misalign if the screw follows the grain of the wood.
To use, place the large pad of the clamp directly over the center of the joint line on the face side of the workpiece(opposite the pocket holes), clamp with moderate pressure and drive a screw